Cost Effectvie Flocculant for Sludge Dewatering Treatment Agent
Non-toxic Sludge Conditioner Coagulant
Product description:
Sludge conditioner is applicable for the preconcentration and dewatering of sludge in municipal sewage treatment plants as well as various industrial and domestic sewage treatment facilities. It shows strong adaptability to different water qualities and high resistance to acids and alkalis. It is suitable for conditioning sludge before dehydration using centrifugal, plate - and - frame, belt - type and other dehydrating equipment.
This sludge conditioner is safe, non - toxic, water - soluble, non - flammable. It has strong cohesive force, good hydrolytic stability, does not gel, is insensitive to pH changes, and is resistant to chlorine.
It is a new - generation sludge conditioner that can replace lime and iron salts. Previously, for every ton of dried sludge, 200 kg of lime and 150 kg of iron salts (ferric chloride) were added. After using the sludge conditioner, only 5 - 10 kg of pure liquid conditioner needs to be added per ton of dried sludge, without altering the properties of the sludge. This makes the subsequent disposal of the sludge, whether it is composting or drying, much easier.
When this product is added to biochemical sludge with a water content of 80%, the special functional groups of the flocculant molecules are used to disrupt the stability of the interstitial water between sludge molecules. Then, using a conventional drum filter press, the water content of the sludge can be reduced from 80% before dehydration to 50% - 60% after dehydration. The sludge changes from a flowing state before dehydration to a thin - layer mud cake with a certain hardness. The volume of the sludge is reduced by over 50%. The combustion heat value of the dehydrated sludge increases significantly.
The deeply - dehydrated sludge has a wide range of applications and a high level of resource utilization. Using this product for sludge dehydration can avoid energy consumption, reduce sludge increment, and improve sludge quality. The treated sludge from farms and food factories can be directly used as green organic fertilizer.
Applications:
1. The process of dewatering and reducing the quantity of biochemical sludge in municipal sewage treatment plants.
2. The dewatering and reduction of the amount of biochemical sludge present in the sewage plants located within industrial parks.
3. The operation of dewatering and lessening the volume of biochemical sludge in the sewage plants of enterprises.
Specifications:
| Items | LS 40SC | LS 20SC |
| Appearance | Colorless to light-yellow or yellow sticky liquid | Colorless to light-yellow or yellow sticky liquid |
| Solid content % | 39-41 | 19-21 |
| Ionic | Cationic polymer | Cationic polymer |
| Molecular weight | High | High |
| PH | 3-7 | 3-7 |
Application method:
1. Make a dilution of the product to an aqueous solution that is 50 to 200 times the volume of the original product.
2. Based on the amount of dried sludge, add an amount of the agent that ranges from 0.5% to 1% of the dried sludge content.
3. Once it is mixed either in the pipeline mixer or the stirring tank, it proceeds directly into the plate and frame filter press.
Package:
1. The product is packed 200kg net in plastic drum or 1000kg net in lBC.
2. This product is common chemical and should be stored at room temperature. Do not expose it to direct sunlight. It is recommended to store at a temperature of 5-30℃.
3. Shelflife: 12 months
|
|
Cost Effectvie Flocculant for Sludge Dewatering Treatment Agent Non-toxic Sludge Conditioner Coagulant Images
|
